8

I am in the process of building a new computer, and while I'm still waiting on the important parts of the computer, like the CPU and the Motherboard, my 120 GB Solid State drive has arrived, and I figured I could get a jump start on things by pre-installing an OS on it.

I currently have the SSD in an external enclosure connected to a different computer via USB.

The SSD has been identified, and is showing up in Windows' computer management thing, as per this site.

enter image description here

I have a Windows 7 disc image file (thanks to DreamSpark) mounted on a virtual drive (though I could also burn it to a physical DVD if need be) at the ready.

Is there anything else I need to do before installing Windows on the new SSD?

Glorfindel
  • 4,158
Raven Dreamer
  • 2,535

3 Answers3

8

I would recommend waiting until you have the motherboard as the actual chipset and related stuff is quite important for the OS. Might even end up not booting when inserting it in the new computer, at the very least it will have to auto detect and PnP a lot of things.

Mattias Isegran Bergander
  • 509
4

If you insist on doing this now, instead of waiting for the hardware you need, then install it and sysprep it.

After you install Windows on the SSD, follow these steps BEFORE you pull the drive out.

  1. Run Command Prompt as administrator
  2. Type to Command Prompt: %windir%\System32\Sysprep\Sysprep.exe, and hit Enter
  3. In sysprep dialog that opens, choose System Cleanup Action as Enter System Out-of-Box-Experience (OOBE), select Generalize, select Shutdown Options Shutdown. Click OK
  4. Sysprep generalizes now your Windows 7 setup and shuts down your computer.

At this point, disconnect the drive. It will be ready for you to put into your new build. Once you have the rest of the parts, connect the drive.

  1. Boot the PC from sysprep generalized hard disk. You will notice Windows booting as if it was the first boot after installation, installing default and updating registry. One or two reboots are needed, depending on your system specifications
  2. When Windows finally boots up, you will need to enter all information as if this really was a new, fresh installation

That should work just fine.

Bon Gart
  • 13,100
0

Since when could you install Windows 7 to a drive connected via USB? You'll need to attach it to the SATA connection on your system first, then install it there. After it's installed, run SYSPREP as Bon Gart suggested, then you can put it into your new system when the parts arrive

Canadian Luke
  • 24,640