So I have had problems straight out of the box with this printer.
After going through a lot of leveling / slicing things I decided to check what the printer "thinks" is its home settings.
After the following procedure: ▶ Factory Reset ▶ Power Off / On ▶ Manual Mode ▶ Home Button
And, looking at: ▶ System ▶ Info
I get the following position information:
- X: 263.9994 mm
- Y: 153.9987 mm
- Z: 154.0000 mm
Please note:
A relative who has another Qidi (X-Plus) when he homes it his info is exact, X: 0.0000, Y: 0.0000, Z: 200.0000
