0

When I try to print something that is not the test model already on the SD, which means when I try to slice something in Cura 4 and than I start the print, the nozzle stops at Z=15 mm and only the extruder motor goes foward and backward. I tried to modify the G-code but I didn't solve the problem. I need help because it's my first delta 3D printer and I don't know what to do.

0scar
  • 37,708
  • 12
  • 68
  • 156
Valeri 0S
  • 37
  • 6

1 Answers1

1

A distance of 15 mm is about the height of the probe or Z-offset. That can be a clue.

Compare the G-code from the testprint with the G-code you sliced. It can give you other clues.

0scar
  • 37,708
  • 12
  • 68
  • 156
coat
  • 26
  • 1