3D Printing Stack Exchange
3D Printing Stack Exchange

Questions tagged [change-filament]

For questions relating to changing filaments mid-print

For questions relating to changing filaments mid-print. This tag should not be used for using a different filament colour/type/diameter, or just changing filament rolls, between completed prints.

21 questions
7
votes
7 answers

How do people load filament, prime the printhead, flush out the old filament when changing colors when using a standalone 3D printer?

I am wondering how people that use standalone 3D printers (printers that have the ability to print autonomously from SD Card) feed in filament, prime the printhead and/or change filaments without a laptop ? Do the printers have a menu to arrange all…
Dimitri Modderman
  • 407
  • 3
  • 7
6
votes
2 answers

Hold torque during pause to change filament

How can I achieve keeping the motors active during pause to avoid moving their position during filament changes? I have changed the filament during some prints to change the color or to change the a newer spool, but sometimes the X axis is moved…
Fernando Baltazar
  • 1,520
  • 3
  • 15
  • 21
6
votes
1 answer

Help with my G-Code to change filament change mid-print

I'm using Ultimaker Cura, and I want to change the filament for a print that I'm attempting at layer 15. The problem I'm having is that I also need to use G-code to load and unload the filament with my BMG extruder. This is the script that Ultimaker…
double0psycho
  • 61
  • 1
  • 2
3
votes
3 answers

Strange problem with quality, what might be the reason for these bubbles?

I changed the filament, and to adjust filament temperature, I printed a test model and it looked good: But printing another part did not go so well: After the failed print I ran another test: Еverything is done with the same settings. And I…
Dimitar Manovski
  • 33
  • 3
3
votes
2 answers

My first attempt at pausing a print and changing filaments resumed from the wrong position -- how do I troubleshoot?

I'm attemping my first print where I pause the print, change the filament, and resume to achieve a two-color print. My first attempt failed when the printer resumed printing over a centimeter away from where it should have on the X axis. My second…
STW
  • 202
  • 3
  • 6
3
votes
4 answers

What techniques are needed to minimise layer separation after filament change?

I have been trying to make some small signs, and to highlight the text by changing between black and white filament at a layer just above where the text comes out of the back plate. I've used Cura 4.12 and the "change filament" script to make the…
Criggie
  • 1,124
  • 7
  • 23
3
votes
1 answer

What to do if filament spool won't fit in 3D printer

My sample filament has just ran out. Luckilly, I've already bought more filament. The only problem I have is that the spool for the new filament won't fit inside my 3D printer. The filament itself works with my printer; it's just the spool that is…
shwin320
  • 307
  • 4
  • 10
3
votes
0 answers

Filament change (M600) causes color mixing despite excessive purge

I have an Anet A6, where I uploaded Marlin 1.1.9, because the manual filament change on the stock firmware was really bad (90 % of the times it clogged the hotend). I've tweaked it a bit, and I'd say it works fine, but I have a problem with my…
Wojciech
  • 41
  • 1
2
votes
3 answers

Why won't my filament feed through the extruder anymore?

Printer: Monoprice Select V2. I've done several prints already and swapped out filaments many times but in my most recent swap, I can't feed my PLA through any more. I first preheat my extruder for PLA temps (185 °C). Then I press the plastic thingy…
kane
  • 479
  • 1
  • 7
  • 13
2
votes
1 answer

Complete filament retraction when mid print filament change

I've tried to print in two colours avoiding M600 (my Ender 3 V1 won't recognize it). After reading, trying, and asking in other forums I still can't get it. Everything goes fine until the second M25 (pause). At that point, instead of waiting the…
julio
  • 155
  • 7
2
votes
1 answer

Prusa i3 MK3 let's me change filament midway in a layer

I was printing a 3D piece as usual when the printer suddenly asked me to unload the filament and load the filament mid-print. The change happens several times within the first layer already. The only thing I recall being different from previous…
Thomas Weller
  • 979
  • 2
  • 13
  • 24
2
votes
1 answer

What's the best way to pull out fillament from an all metal print head

Since retractions above 4 mm can cause jams due to plastic sticking to the cold half of the metal print head, what's the best way to avoid jams when swapping filaments? Cool down and yank out, rapid pull out while melted, pull out at partial heat…
Mr.UNOwen
  • 115
  • 6
1
vote
1 answer

Stringing after filament change

In my previous questions (here and here) I was trying to achieve a filament change without M600 command. Finally made it getting a good second colour adhesion. Now I'm facing the stringing issue when printing small separated parts. I read this…
julio
  • 155
  • 7
1
vote
2 answers

Why is it purging over the print?

I'm trying to print this pet ID in two colours.While I'm still going around my previous post I tried this code which lead to the results shown in the picture. On your left there are the two initial lines, on your right is the result of the filament…
julio
  • 155
  • 7
1
vote
1 answer

What currently available solutions can be used to determine how much filament weight is left on the spool without knowing empty spool weight?

Having used multiple brands of filament and different spool sizes what always annoyed me is that almost no single filament producer that I know, states clearly and accurately the weight of the empty spool. How can we possibly estimate how much…
Bob Ortiz
  • 1,255
  • 1
  • 10
  • 44
1
2